Results 31 to 40 of 54
Thread: simplify3d
-
01-27-2015, 04:00 PM #31Bambu P1S/AMS
NVision4D http://nvision4d.com
-
01-27-2015, 04:21 PM #32
Just change the .stl to .fff after download as the site will not accept .fff files.
Last edited by beerdart; 01-27-2015 at 04:52 PM.
-
01-27-2015, 04:43 PM #33
This is an .stl file and when I import it, it crashes S3D. Did you send the .stl by mistake instead of the profile, '.fff' ?
Here are my PLA profiles if anyone wants to look at them.
Simplify3D_RH-PLA Profiles.zipBambu P1S/AMS
NVision4D http://nvision4d.com
-
01-27-2015, 04:49 PM #34
Tricky, got it, cool, thanks. So did the site not want to let you attach an .fff so you changed it to .stl? If so, good trick.
Edit:
yea, it's not working correctly. I doesn't bring in your settings. It opens and displays the name but all the settings are mine. Can you .zip your .fff and resend it?Last edited by RobH2; 01-27-2015 at 04:55 PM.
Bambu P1S/AMS
NVision4D http://nvision4d.com
-
01-27-2015, 04:51 PM #35
-
01-28-2015, 03:45 PM #36
A few more test print from yesterdays snow day..
Cura with the same base settings as the S3D at .1 layer height
-
01-28-2015, 03:47 PM #37
Next is S3D at .2 layer height. Looks clean my conclusion is the .4 nozzle is flowing too much for the .1 layer height.
-
01-28-2015, 04:12 PM #38
Another cute feature is the ability to import a photo or any graphic and 3D slice it.
-
02-04-2015, 10:07 AM #39
- Join Date
- Dec 2014
- Location
- Canada
- Posts
- 498
An update has been released with some interesting improvements
http://www.simplify3d.com/get-your-calipers/
-
02-08-2015, 03:00 PM #40
- Join Date
- Nov 2014
- Posts
- 58
hi guys so after almost a month battling with some mechanical and firmware issues, now im starting to get "Decent" prints . but now im struggling to get retraction to work properly . im not getting a lot of oozing over the print but i have notice this gaps / Blobs every layer change or when the nozzle move to another spot. Im using the Stock Extruder (gregs)
i was wondering what setting for retraction is working for you and how can i minimize this .
Holes and pockmarks in print walls
Yesterday, 09:14 AM in General 3D Printing Discussion