Results 1 to 5 of 5
Thread: printer tale covering
-
01-25-2015, 03:24 PM #1
- Join Date
- Jan 2015
- Posts
- 14
printer tale covering
dear all
im new to 3 d printing got mine on Saturday my question is the heated table has kapton tape on it followed by blue builders tape do I need both types of covering on
thanks in advance
dave anderson
-
01-25-2015, 06:29 PM #2
- Join Date
- Jan 2015
- Location
- Austria
- Posts
- 19
I don't see the use of having both tapes applied...
I use the blue tape primarily to increase the adhesion of the filament to the bed so it won't come off that easy during printing and allowing me to print much higher objects
my blue tape has a much rougher surface than the kapton tape and you get different results in your printed objects surface too (the side on the bed)
on kapton tape you have a shiny smooth printed surface as compared to a much rougher surface when you print on the blue tape (obviously)
-
01-26-2015, 05:25 AM #3
- Join Date
- Jan 2015
- Posts
- 14
thanks for the info much appreciated
-
01-27-2015, 04:15 AM #4
- Join Date
- Jan 2015
- Posts
- 19
What print material does your printer use? Blue painter tape is used for PLA and does not want to be heated up. Which printer did you get?
-
01-27-2015, 04:45 AM #5
- Join Date
- Jan 2015
- Location
- Austria
- Posts
- 19
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help