Results 1 to 4 of 4
Thread: need some advice
Threaded View
-
01-18-2015, 09:24 AM #2
- Join Date
- Jan 2015
- Posts
- 10
As I read it, the printer is now even out yet. I've been looking into 3d printing all of a week now and don't even have a machine set up yet, but the impression I've gotten is that there are so many companies that are "just about" to launch their 3d printer.
Based on my research, I decided to assemble my own based on the Prusa i3 design. It is proven and has an entire community providing support.
For $444.38 shipped, I got the complete i3 bill of materials to include an all aluminum frame and some extras like a graphic LCD with SD care reader, mk8 extruder, 2 extra nozzles, a servo to drop a microswitch for tilt correction before the print, and 1kg of well reviewed ABS filament. Note that I got a discount on ebay of about $20 and I had my own microswitch already, so this would cost more like 470 for someone else.
Here is what I bought: I caution you that I'm a complete rookie. I may have made some mistakes. Consult others.
frame/hw/bearings http://www.ebay.com/itm/Reprap-Prusa...item2ed6e03470 abs plastic http://www.ebay.com/itm/Reprap-Prusa...item1c4298a234 extruder http://www.ebay.com/itm/MK8-Extruder...e=STRK:MESE:IT steppers http://www.amazon.com/NEMA17-Stepper...21483482&sr=1- electronics/heated bed http://www.ebay.com/itm/Ramps-1-4-A4...-/331224153112 couplings http://www.ebay.com/itm/2x-Flexible-...item4ae0a05808 power supply http://www.ebay.com/itm/DC-12V-5A-10...item2a355ffd66 .2mm nozzle http://www.ebay.com/itm/2-mm-0-2mm-C...item2ed5ec73d8 .3mm nozzle http://www.ebay.com/itm/New-0-3mm-Co...item5d4f5d7396 servo http://www.ebay.com/itm/1x-SG90-Micr...item20decf70e3 Microswitch for autolevel http://www.newark.com/omron-electron...pdt/dp/36K7635
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion