Results 1 to 1 of 1
-
01-17-2015, 01:31 PM #1
Setting max_bed_power and PID_integral_drive_max to 255 vs 256 in configuration.h
Working on updating my firmware to dacb's trunk. One thing I noticed was that in my original configuration.h max_bed_power and PID_integral_drive were 256, where as in dcab's it its 255. In reading it seems that 255 is the correct numbers since the range is 0-255. Any thoughts?
New member with print issue
Today, 08:57 AM in Tips, Tricks and Tech Help