Results 1 to 10 of 15
Threaded View
-
01-16-2015, 09:08 AM #3
One more possibility - do you have the switch strapped to the wood bracket with zip ties? If so, that could be letting the switch move just a bit, messing up repeatability. I used M2.5x12 screws and nuts instead of the zip ties, using a 3/16-inch drill bit to cut a countersink hole into the wood bracket for the screw head.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help