Results 1 to 9 of 9
Thread: Removing ABS Slurry
Threaded View
-
01-15-2015, 02:28 PM #5
- Join Date
- Oct 2013
- Location
- new jersey
- Posts
- 752
the idea is to use slurry that you made with the same plastic you are printing. you wont really get it to come off since your part is all abs thats melted to abs. you need the colors to all be the same if your going to see it.
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion