Results 1 to 10 of 28
Threaded View
-
01-14-2015, 08:51 AM #7
- Join Date
- Nov 2014
- Posts
- 58
thanks for the info! ill try bumping up my extruder temp . in addition im having very good bed adhesion with an PEI sheet over my glass . it sticks so well that you can not even take off the printed part until it cools below 60c . and the best part is you dont need to add anything . no spray , slurry or tape .
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help