Results 1 to 8 of 8
Thread: First Layer Snags
Threaded View
-
01-10-2015, 07:52 AM #7
- Join Date
- Jul 2014
- Location
- Ontario, Canada
- Posts
- 257
I used both an earlier release of slic3r, 0.99 and 1.17 dame effect, so I switched to cura and it appears it is fine there, will try a print with cura to see if that will work!
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion