Results 1 to 8 of 8
Thread: i3v Threaded Rod vs Lead screw
Threaded View
-
01-07-2015, 01:15 PM #3
- Join Date
- Nov 2014
- Posts
- 522
you could use geared steppers on the Z-axis with lead screws to regain your Z accuracy, that you would lose by moving to the lead screws, that wouldnt really solve any issues on either end but it "should" increase Z accuracy depending on how fine your lead screws are...
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion