Results 1 to 10 of 17
Thread: bstag i3v 12" build
Threaded View
-
01-04-2015, 12:32 PM #14
- Join Date
- Dec 2014
- Posts
- 33
I have put in about 40 hours of printing. Had a leak out the join in the heater with the hexagon. Had to take apart and fix that. Make sure to tighten when hot. I have added the mount for the Auto level probe but not enabled it. My current build surface is buildtak on top of the aluminum bed. I have put some major damage n the buildtak sheet dialing in z. I have switched over to a new micro adjust on the Z that i can adjust from the front of the printer and not have to do crazy stuff to adjust. I have added other basic upgrades like thing to hold in the z screw rods so i don't bend them. A couple updated pictures. I also added led lighting. Some issues uploading pictures will post them another way.
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)