Results 1 to 6 of 6
Thread: Rambo Stepper connector
-
01-02-2015, 10:13 AM #1
- Join Date
- Dec 2014
- Location
- Canada
- Posts
- 498
Rambo Stepper connector
Does anyone know the model of the connector part # used to connect a stepper motor to the rambo board
I see them on this page, but they dont say what they are exactly.
http://www.instructables.com/id/How-...r-preparation/
-
01-02-2015, 10:37 AM #2
- Join Date
- Nov 2014
- Posts
- 522
your connectors will already be on your motors from maker farm. you shouldnt have to worry about crimping terminals and building the female connectors.
as to exact name i don't know
-
01-02-2015, 10:55 AM #3
- Join Date
- Dec 2014
- Location
- Canada
- Posts
- 498
Im building the Dual extruders with Nema 17s and the ends are bare
-
01-02-2015, 11:20 AM #4
- Join Date
- Nov 2014
- Posts
- 522
you should have extra connectors that were provided with your rambo board since you got the 12" model. :-) outside of that I dunno... i'll be looking myself soon planning to do the itty bitty dual with the nema 14's
-
01-02-2015, 11:28 AM #5
-
01-02-2015, 01:05 PM #6
Not speaking from experience but from a rambo video I saw (zennmasterm on youtube I think) the connector ends/wires come in a bag with the rambo board. you'll have to splice the motor wires to the rambo connector wires.
Rambo board is a nice upgrade from ramps.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help