Results 1 to 8 of 8
Threaded View
-
12-30-2014, 09:37 PM #7
Lifting does help with the oozing. It breaks the strands and they aren;t that hard to remove. I use a .2mm retraction in Slic3r
Lifting does help with the oozing. It breaks the strands and they aren;t that hard to remove. I use a .2mm retraction in Slic3r
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion