Results 1 to 8 of 8
Threaded View
-
12-30-2014, 09:08 PM #5
- Join Date
- Jul 2014
- Location
- Eastern Colorado
- Posts
- 536
I use the Lift Z together with retraction. It does slow down prints a little bit, but there's less chance of the nozzle hitting a warped part of the print and either jamming an axis and printing in the wrong place, or knocking the whole print off the printbed.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help