Results 1 to 10 of 757
Threaded View
-
12-21-2014, 03:04 PM #11
Most slicers (including Cura) let you put start up GCode into the generated file. You want Cura to put a G28 followed by a G29 at the start of every file it generates.
Most slicers (including Cura) let you put start up GCode into the generated file. You want Cura to put a G28 followed by a G29 at the start of every file it generates.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help