Results 1 to 5 of 5
Threaded View
-
12-20-2014, 01:35 PM #5
- Join Date
- Mar 2014
- Posts
- 223
I went through a lot of frustration with a J-head and direct drive extruder, until I did two things, I changed the head for an E3D and made my own toothed gear for the stepper motor with a metal collar and an M3 tap to cut the grooves (using a jig I printed for that purpose). Now the extruder just keeps going and going and going... not a single skip.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help