Got the proto3 printed and assembled very robust one issue the stepper center hole need to be oblonged for belt adjustment..

Thanks for the tweaks.
Quote Originally Posted by RobH2 View Post
This is not the prettiest model but it might do the trick. If so, I'll make it nicer later. I know it's a long print but if you think this will do it give it a go.

It must warp a alot because the best part about 'clough42' using belts is that they don't skip unless they get really loose. Are you pushing too many amps through the motors maybe? Mine don't run very hot.

Nema17_Versions.jpg