Results 1 to 5 of 5
Thread: Aurora 3D Prusa i3
Threaded View
-
12-17-2014, 05:54 PM #2
- Join Date
- Dec 2014
- Posts
- 5
Hi,
I was able to figure out some of my issues. I found the firmware settings that allow be to adjust the X, Y, Z travel. There was also an offset there, but I was able to get the offset with repetier-host to work. after setting the offset, had to re slice the model. Things now land in the center of the table.
Still having issues getting things to print solid. I tried setting shell thickness to some value larger than the model size and setting the fill to 100%. Neither printed a solid object.
Joel
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help