Results 91 to 100 of 119
-
12-09-2014, 10:27 PM #91
What was/is the most difficult thing for you to learn/understand about 3D Printing?
The most difficult thing for me to understand about 3D printing is what is the most effective way to slice a part to keep its strength but use less material
-
12-11-2014, 12:40 AM #92
- Join Date
- Dec 2014
- Posts
- 31
Slicing, raft, and structure still get me.
-
12-11-2014, 03:54 AM #93
- Join Date
- Dec 2014
- Location
- Finland
- Posts
- 26
Learning to use software to create 3D objects has been a challenge and still is to me. I have had no use for this kind of programs since school days in the ninetees...
-
12-13-2014, 02:26 AM #94
- Join Date
- Jul 2014
- Posts
- 11
The curing depth calculations for SLS systems.
-
12-14-2014, 09:03 AM #95
- Join Date
- Sep 2014
- Posts
- 24
Probably fixing errors in files. Tricky subjects like non manifold geometry, and also the concept of support and overhangs.
I had to send files back and forth to shapeways until their feedback got me both a good model and practical understanding.
-
12-14-2014, 09:22 AM #96
- Join Date
- Dec 2014
- Posts
- 31
Triying to design things which do not need support
-
12-14-2014, 09:24 AM #97
- Join Date
- Dec 2014
- Posts
- 11
Adjusting the printer
-
12-14-2014, 10:57 AM #98
- Join Date
- Dec 2014
- Posts
- 9
Probably the properties of the different materials, such as which would be most appropriate for what projects.
-
12-14-2014, 06:59 PM #99
- Join Date
- Jun 2014
- Posts
- 63
different type of 3d printing technology, FFF, FDM, SLA, SLS, etc. which technology is for me.
different machine / model / design for FFF / FDM. what model is for me.
-
12-15-2014, 06:09 AM #100
- Join Date
- Dec 2014
- Posts
- 7
Using CAD software to make 3D Models for printing.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion