Results 11 to 18 of 18
Thread: Solid V Delrin Idlers vs Dual V
-
12-10-2014, 08:48 PM #11
- Join Date
- Jul 2014
- Location
- Eastern Colorado
- Posts
- 536
-
12-11-2014, 11:00 PM #12
- Join Date
- Nov 2014
- Posts
- 522
My 12" came with the split wheels
-
12-11-2014, 11:08 PM #13
If you want to change them out this is all you need right?
http://openbuildspartstore.com/openb...-wheel-delrin/
Or upgrade to the wheels of steel:
http://openbuildspartstore.com/openbuilds-dual-v-wheel-metal/
or Xtreme Clear:
http://openbuildspartstore.com/openb...-dual-v-wheel/
-
12-15-2014, 08:31 AM #14
Yeah looks like the exact same ones. I like the clear ones but I'm not sure if those wheels of steel would be an upgrade haha. I see many aluminum shavings and loud grating printing going down that path :P
-
12-15-2014, 11:30 AM #15
Those steel ones do say they are for hardened rails. I'd rather have the wheels wear than the rails wear...
-
12-15-2014, 11:47 AM #16
Maybe they are used for an Open Pizza Cutter. (aka my next project)
-
12-22-2014, 05:58 AM #17
- Join Date
- Oct 2014
- Location
- Evansville, IN
- Posts
- 6
I received my 10" last Wednesday, but didn't open the box until yesterday. I do have the single wheel idlers.
-
12-22-2014, 08:49 AM #18
- Join Date
- Dec 2014
- Posts
- 33
IN my 12" one I received split ones. I will be testing some of the Clear ones on the Z axis first i also ordered the split v version of those.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion