Results 1 to 10 of 757
Threaded View
-
12-11-2014, 08:30 AM #11
Well... You can deactivate ABL very easily. First, you can do a G28 and print without doing a G29. That will set the correction matrix to unity and you will get exactly the same behaviour that you would get if it wasn't turned on. But if you don't trust that, you can simply comment out the line:
#define ENABLE_AUTO_BED_LEVELING
and recompile. It will be GONE ! And you can turn it back on by just changing it back.
Holes and pockmarks in print walls
Today, 09:14 AM in General 3D Printing Discussion