Results 1 to 10 of 757
Threaded View
-
12-09-2014, 05:20 PM #10
If you use PronterFace to give it the G28 and the G29... It should tell you how high it thinks the nozzle is above the bed. You can click the Z Axis move buttons and move it down .1mm at a time until you get close to 0.0 You should be able to see which way you have to adjust the Z_PROBE_OFFSET_FROM_EXTRUDER number.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion