Results 21 to 30 of 44
-
12-02-2014, 07:18 PM #21
This is pretty lame but I actually think one of the parts that gave me the most trouble lately came out the best!
It's a gregs large extruder gear printed on a Makerfarm 8" i3v in ABS at 0.2 mm layer height with a 0.3 mm nozzle on a hexagon hot end. The layers are so clean!
P1000077.jpgP1000078.jpgLast edited by gmay3; 12-03-2014 at 03:23 PM. Reason: forgot say which printer model it came from
-
12-02-2014, 11:29 PM #22
I doubt you could print that any cleaner. Nice job...
Bambu P1S/AMS
NVision4D http://nvision4d.com
-
12-03-2014, 08:39 AM #23
-
12-03-2014, 02:47 PM #24
-
12-09-2014, 10:11 AM #25
Hi all,
Just wanted to share some of the cool things I've printed in the past. And a disclaimer - these were all printed on a highly-modified Printrbot Simple that I've been experimenting with for a year now. It was a late-2013 model kit that I originally built back in mid-December last year. All these were printed in PLA which is the only material that a basic wood-model Simple can handle unless it has a heatbed added, which is one mod I haven't done yet. I'm also a bit of a SciFi fan so printing these models have been a fun (although sometimes frustrating) learning experience...
I now have a Makerfarm 12" iv3 on the way and am looking forward to experimenting with it and the superior hardware that it uses...and modding the hell out if it. I'll print some of these models on it and compare results, plus I'm looking forward to trying different materials that the Simple can't utilize. Great forum, BTW!
Mk2 Viper.jpgMicro Falcon.jpgD7.jpgEiffel Tower.jpgLots O stuff.jpgLast edited by WhiskeyTango; 12-09-2014 at 10:29 AM.
-
12-09-2014, 11:27 AM #26
Nice array of stuff and some good looking prints. Having seen this I think you are going to love the 12" Makerfarm.
Bambu P1S/AMS
NVision4D http://nvision4d.com
-
12-09-2014, 12:02 PM #27
Really cool prints WhiskeyTango! I'm a sci-fi fan as well but I have never tried printing any of these models yet! Looks like I'm going to have to start.
-
12-09-2014, 12:57 PM #28
- Join Date
- May 2014
- Posts
- 16
IMG_3706.jpgskull
ABS, 0.2layer, KISSlicer, 280C.
IMG_3699.jpgIMG_3704.jpgLast edited by abuharsky; 12-09-2014 at 02:55 PM.
-
12-09-2014, 02:20 PM #29
Thanks Robh2 and Gmay3 - looking forward to getting the 12" Prusa i3v, the sooner the better!
-
12-09-2014, 02:54 PM #30
- Join Date
- Nov 2014
- Posts
- 138
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help