Results 21 to 30 of 44
-
12-02-2014, 07:18 PM #21
This is pretty lame but I actually think one of the parts that gave me the most trouble lately came out the best!
It's a gregs large extruder gear printed on a Makerfarm 8" i3v in ABS at 0.2 mm layer height with a 0.3 mm nozzle on a hexagon hot end. The layers are so clean!
P1000077.jpgP1000078.jpgLast edited by gmay3; 12-03-2014 at 03:23 PM. Reason: forgot say which printer model it came from
-
12-02-2014, 11:29 PM #22
I doubt you could print that any cleaner. Nice job...
Bambu P1S/AMS
NVision4D http://nvision4d.com
-
12-03-2014, 08:39 AM #23
-
12-03-2014, 02:47 PM #24
-
12-09-2014, 10:11 AM #25
Hi all,
Just wanted to share some of the cool things I've printed in the past. And a disclaimer - these were all printed on a highly-modified Printrbot Simple that I've been experimenting with for a year now. It was a late-2013 model kit that I originally built back in mid-December last year. All these were printed in PLA which is the only material that a basic wood-model Simple can handle unless it has a heatbed added, which is one mod I haven't done yet. I'm also a bit of a SciFi fan so printing these models have been a fun (although sometimes frustrating) learning experience...
I now have a Makerfarm 12" iv3 on the way and am looking forward to experimenting with it and the superior hardware that it uses...and modding the hell out if it . I'll print some of these models on it and compare results, plus I'm looking forward to trying different materials that the Simple can't utilize. Great forum, BTW!
Mk2 Viper.jpgMicro Falcon.jpgD7.jpgEiffel Tower.jpgLots O stuff.jpgLast edited by WhiskeyTango; 12-09-2014 at 10:29 AM.
-
12-09-2014, 11:27 AM #26
Nice array of stuff and some good looking prints. Having seen this I think you are going to love the 12" Makerfarm.
Bambu P1S/AMS
NVision4D http://nvision4d.com
-
12-09-2014, 12:02 PM #27
Really cool prints WhiskeyTango! I'm a sci-fi fan as well but I have never tried printing any of these models yet! Looks like I'm going to have to start.
-
12-09-2014, 12:57 PM #28
- Join Date
- May 2014
- Posts
- 16
IMG_3706.jpgskull
ABS, 0.2layer, KISSlicer, 280C.
IMG_3699.jpgIMG_3704.jpgLast edited by abuharsky; 12-09-2014 at 02:55 PM.
-
12-09-2014, 02:20 PM #29
Thanks Robh2 and Gmay3 - looking forward to getting the 12" Prusa i3v, the sooner the better!
-
12-09-2014, 02:54 PM #30
- Join Date
- Nov 2014
- Posts
- 138
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help