Results 1 to 3 of 3
-
12-02-2014, 03:51 PM #1
- Join Date
- Dec 2014
- Posts
- 2
right angle hot end for bowden style extruder - any out there?
I'm working on a compact 3D printer design but I don't have much room above the print head. I need to use a bowden style extruder and I was wondering if there might be a hot end available with a 90 degree bend at or near the tip - which would allow the feed cable to enter at the side instead of the top. If someone knows of such a hotend or maybe has a working prototype, I'd like to hear from you.
-
12-02-2014, 04:06 PM #2
- Join Date
- Jun 2014
- Location
- Burnley, UK
- Posts
- 1,662
Stratasys use horizontal feed into the hot end.
-
12-03-2014, 10:25 AM #3
- Join Date
- Dec 2014
- Posts
- 2
Thanks for letting me know it can be done but from Stratasys it's probably made of unobtainium
Someone else was kind enough to point out another one today:
https://www.youtube.com/watch?v=MrFa...ature=youtu.be
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help