Close



Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 40
  1. #11
    Engineer
    Join Date
    Oct 2013
    Location
    new jersey
    Posts
    752
    so i decided to make 2 sets of these speakers. one set was for me and another was for an audiophile friend of mine. these were printed on my makergear m2 in pla. i used all automotive paint to prime, faux finish and clear coat them. one set i did in a wood grain and the other was in chameleon silver to green color changing paint which actually goes from purple, to blue to silver to green. really cool with all the curves of this model. the woodgrain one i also applied a candy to the aluminum cone of the speaker to make it gold to match the spike feet and binding posts.enjoy.

    IMG_6182.jpgIMG_6187.jpgIMG_6195.jpg

  2. #12
    Engineer
    Join Date
    Oct 2013
    Location
    new jersey
    Posts
    752
    here is the chameleon one.

    IMG_6203.jpgIMG_6201.jpgIMG_6197.jpg

  3. #13
    Super Moderator Geoff's Avatar
    Join Date
    Nov 2013
    Location
    NSW, Australia
    Posts
    1,824
    Add Geoff on Thingiverse
    Mate, they deserve and award, seriously. I loved the wood but wow the chameleon looks freakin great!

    But.. how do they sound ?
    Hex3D - 3D Printing and Design http://www.hex3d.com

  4. #14
    Engineer
    Join Date
    Oct 2013
    Location
    new jersey
    Posts
    752
    Well i went to try em out last night and i couldnt find a headphone to rca cable for the amp so i have yet to listen to them. My friend is bringing one over today so we can fire them up. I am expecting them to sound real good. The speakers i used got super reviews and are matched to the enclosure size. The original b&w nautilus speakers fro 20 years ago which these are a half copy of were $60 grand a pair and one of the best speakers of their time. Who knows though......i guess ill find out later today ill probably end up doing that wood grain finish in matte on that horgahan model as well. Should look pretty realistic when its done.
    Last edited by jimc; 11-27-2014 at 07:09 AM.

  5. #15
    Engineer
    Join Date
    Oct 2013
    Location
    new jersey
    Posts
    752
    Ok i finally had a chace to get these hooked up and listen to them. They truely sound fantastic. For a single full range speaker i was quite impressed. They sound very warm and full. Not overly bright or harsh in any way. Bass response for a small 3" speaker is amazing. I have auditioned many speakers over the years and i can say i really couldnt expect more from these. I have them on my desk hooked to my mac with a small 20 watt class t amp. Everything was bought from parts-express and the total was maybe around $125 with the amp. If anyone is interested i can come up with a parts list.

  6. #16
    Super Moderator RobH2's Avatar
    Join Date
    Nov 2013
    Location
    Baltimore, MD
    Posts
    899
    Add RobH2 on Thingiverse
    Those are truly beautiful. What was your process to get the surface smooth and prepped for paint?
    Bambu P1S/AMS
    NVision4D http://nvision4d.com

  7. #17
    Engineer
    Join Date
    Oct 2013
    Location
    new jersey
    Posts
    752
    Just primer and sand smooth. I only use automotive finishes. The whole point of primer is to build up thick so you can sand it back down smooth to make a real nice surface to paint on. Unfortunately nothing good comes from a rattle can. You need to use real professional products. A good automotive primer is catalyzed so when you paint on it, it wont absorb the solvents from the paint and shrink back into the layer marks that our printers make. Once its smoothed and the base color is on then you apply a good urethane clearcoat. After its cured you can take it a step further if you want and sand and buff the finish

  8. #18
    I am having difficulty downloading the file for the print. Is there anywhere we can get it other than the original website?

    Sorry I finally got it.
    Last edited by Rusty; 11-29-2014 at 10:05 AM.

  9. #19
    Engineer ralphzoontjens's Avatar
    Join Date
    Nov 2013
    Location
    Tilburg, the Netherlands
    Posts
    533
    Follow ralphzoontjens On Twitter Add ralphzoontjens on Facebook Add ralphzoontjens on Shapeways Add ralphzoontjens on Thingiverse
    I like how the layer stepping has been aesthetically integrated. I don't mind the design, it would have been better if the speaker would have been recessed about 5 mm and not directly stuck on the front.

  10. #20
    Engineer-in-Training
    Join Date
    Oct 2014
    Posts
    314
    It seems the design has been locked up and is now sold rather than given away freely. Unless someone knows a source other than akemake's website?

    edit: nevermind. apparently they have two different (very VERY similar looking designs) one is free the other is not

Page 2 of 4 FirstFirst 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •