Results 1 to 8 of 8
-
12-18-2013, 02:43 PM #1
- Join Date
- Nov 2013
- Posts
- 48
Makergear M2 - Are other filaments possible?
The M2 is advertised to be able to print ABS and PLA. Can any upgrades be done to print wood filament or FDM and PVA?
-
12-18-2013, 02:53 PM #2
- Join Date
- Oct 2013
- Location
- new jersey
- Posts
- 752
you can print taulman 618 nylon, the wood stuff i think is ok as well, eco flex, pet, hips. the pva is a support material so thats for dual extruder printers. you can print anything with the m2 that any other printer can. its good up to about 235deg. an all metal hotend is being realsed be them very soon to allow extrusion of pc. should be good to the +300deg range.
-
12-18-2013, 03:02 PM #3
- Join Date
- Nov 2013
- Posts
- 48
Thanks for the help! Where can I find more information on the filaments you are listing?
-
12-18-2013, 03:10 PM #4
- Join Date
- Nov 2013
- Posts
- 48
Can i print in chocolate? The wife would definitely let me buy one then!
-
12-18-2013, 05:32 PM #5
- Join Date
- Oct 2013
- Location
- new jersey
- Posts
- 752
Www.makergeeks.com carries alot of the exotic filaments
-
12-19-2013, 03:30 PM #6
- Join Date
- Nov 2013
- Posts
- 48
thank you!
-
12-21-2013, 08:27 AM #7
- Join Date
- Sep 2013
- Posts
- 57
-
12-21-2013, 09:36 PM #8
- Join Date
- Sep 2013
- Location
- Saskatchewan, Canada
- Posts
- 294
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help