Results 1 to 7 of 7
-
11-29-2014, 02:07 PM #1
- Join Date
- Nov 2014
- Posts
- 3
SD unable to display more than 1 file at a time.
First off I am new to this venture and this forum. So thanks in advance for any answers or advice.
My question or issue is, when placing files on my SD card, if I place a single file at a time on it. The printer sees and displays the file and I can print perfectly. However, if I place anymore than just one file onto the SD card, my printer does not display any of them. I do not know if it reads them, but it certainly doesn't display any files to print.
Any one else having or had this issue? Any help is much appreciated.
-
11-29-2014, 04:37 PM #2
Your ink jet printer?
Seriously though, you need to supply just a little more info...
-
11-29-2014, 04:51 PM #3
- Join Date
- Nov 2014
- Posts
- 3
Flashforge Creator X 3D printer.
-
11-29-2014, 05:01 PM #4
- Join Date
- Nov 2014
- Posts
- 35
I have about 30 loaded on mine....
it will only read .x3g you may have .stl on some of yours...they would have to be converted
-
11-29-2014, 06:19 PM #5
- Join Date
- Nov 2014
- Posts
- 3
No they are certainly .x3g files.
-
11-30-2014, 01:34 AM #6
You may have made the filename too long, you are limited to 8 characters per filename.
Hex3D - 3D Printing and Design http://www.hex3d.com
-
12-01-2014, 07:51 AM #7
- Join Date
- Oct 2014
- Posts
- 314
You may also have a problem with your SD card. Have you tried reformatting it and/or using a different card? Everyone now and then my printer throws a message at me, something like "sd reads aren't working well right now, try again later" or something similar. I remove and reinsert the card and all is well.
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help