Results 1 to 10 of 18
Thread: my smallest print
Threaded View
-
12-19-2013, 06:51 PM #15
Where does it say to extrude PLA at 60c? The HBP (if you have one) should be set to ~60c for PLA and the extruder should be set to ~220c. We usually extrude PLA around 210-220 on our Prusas. We may need a new topic for this as we are muddying this one?
Last edited by JohnA136; 12-24-2013 at 08:46 PM.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion