Results 1 to 10 of 48
Threaded View
-
11-24-2014, 09:14 AM #10
One thought is to check how hot the Y-motor gets during your print. For those of us with the "hot" running motors, I found the Y-motor got the hottest of them all, likely since it is so boxed in when mounted in the frame. Maybe that heat is causing the Y-motor to skip or is soaking through the pulley to the belt?
For a while I printed with a small desk fan angled towards the Y-motor, and then with a 40mm fan sitting on the table in front of the motor. Now the 40mm fan is mounted to a piece of wood that is in turn bolted to the bottom side of the v-rails. It only takes a small amount of airflow to keep the motor case at what feels like a reasonable temperature.
EDIT: More info on mounting a Y-motor cooling fan to the v-rails is in this post of my build thread - Y MOTOR COOLING FANLast edited by printbus; 11-24-2014 at 09:39 AM.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help