Results 1 to 4 of 4
Threaded View
-
11-14-2014, 03:06 PM #2
- Join Date
- Jan 2014
- Posts
- 462
The thermistor is generally located dead-center on the bed. There's normally a hole through the bed so the thermistor can make contact with the surface you're printing on (if, for example, you've got a borosilicate glass sheet clamped to the heated bed).
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)