Results 1 to 10 of 255
Threaded View
-
11-13-2014, 10:10 AM #10
It's hard to say. If the compound was metallic in color, I believe drying out is what is intended - improving the bond of the remaining silver-laden part. The problem with that is any mechanical movement breaks the bond and the compound has to be cleaned off and reapplied. I used the old school white grease that seems to never dry out. Just a bit along the edge that the set screw will push against the block.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help