Results 1 to 3 of 3
-
11-09-2014, 12:03 PM #1
Polishing colorfabb bronzeFill Filament
For those of you wondering what it's like to print with and then polish the 80% bronze 3D printer filament created by colorFabb called bronzeFill, we have teamed with Barnacules Nergasm to show you all the results. Barnacules has printed out 'Bitcoins" using bronzeFill, which he then goes on and tries to polish using several different methods, including sandpaper, steel wool, a Vibratory bowl, and more. Which worked the best? Find out in our article seen here: http://3dprint.com/23739/barnacules-bronzefill-polish/
Also check out the video produced by Barnacules below. Let us know if you have tested out any other polishing methods for bronzeFill or copperFill, and what the results were.
-
11-09-2014, 12:24 PM #2
- Join Date
- Nov 2014
- Posts
- 1
Great write up Brian, thank you for making it!
-
11-10-2014, 09:49 AM #3
- Join Date
- Oct 2014
- Posts
- 441
Great review Barnacules, I have been really wanting to get that filament to try it. Thanks for going through all that work to find us a good way to polish it up.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help