Results 1 to 8 of 8
Threaded View
-
11-02-2014, 11:12 AM #2
- Join Date
- Oct 2014
- Posts
- 93
hi, welcome,
from what i have learnt, 230c at nozzle is way to hot for PLA,
try
nozzle = 195 (even thats to hot but works for me)
infill = 10% - 15%
shells = 2
build plate at 65c
movement speed 40
travel speed at 70
these will give you some quality results, except on hugh overhangs, still trying to figure that one out, but i did print an iphone 5 case last night and came out perfect with those settings
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help