Results 1 to 4 of 4
Threaded View
-
12-08-2013, 10:19 PM #2
- Join Date
- Oct 2013
- Location
- new jersey
- Posts
- 752
sure get a thermistor and either mount it in the block if there is a hole for it. if not and even a more accurate way is to take 1/4" kapton and tape it to the side of the nozzle. wrap the kapton tight. i use marlin and it has a PID auto tune feature. if your firmware has that then run it.
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)