Results 1 to 4 of 4
Threaded View
-
12-08-2013, 10:19 PM #2
- Join Date
- Oct 2013
- Location
- new jersey
- Posts
- 752
sure get a thermistor and either mount it in the block if there is a hole for it. if not and even a more accurate way is to take 1/4" kapton and tape it to the side of the nozzle. wrap the kapton tight. i use marlin and it has a PID auto tune feature. if your firmware has that then run it.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion