Results 1 to 2 of 2
Thread: Hot End Thermistor Replacement
-
10-15-2014, 09:15 AM #1
- Join Date
- Oct 2014
- Posts
- 41
Hot End Thermistor Replacement
Hi All,
Ive managed to break my existing hot end thermistor in my Ordbot Hadron, so ordered some new ones. I noticed that the existing thermistor had a clear cover / insulation over the two wires, however the new ones that I ordered dont.
Is anyone able to advise if it essential that insulation is used to keep the wires from touching as Im struggling to find any.
thanks in advance
GrahamLast edited by grezmel; 10-15-2014 at 02:04 PM.
-
10-15-2014, 05:16 PM #2
- Join Date
- Jan 2014
- Posts
- 462
The insulation is vital to prevent the leads shorting together.. I use PTFE heat shrink - search for the smallest diameter you can find.
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help