Results 1 to 10 of 11
Hybrid View
-
12-03-2013, 05:47 PM #1
Hmm I want one .. bad!
The only issue I see that would scare me a little is the glass powder, I asked one of the engineers at shapeways once why everyone is so careful with the powder, can't you just pull it out and dust it off with a brush? rather than the sealed chamber with the air compressor, the really fine removal of the powder etc ... he said if you breathe just one breath of that stuff in, you can kiss your lungs goodbye.. its death.
-
12-03-2013, 08:30 PM #2
- Join Date
- Sep 2013
- Location
- Saskatchewan, Canada
- Posts
- 294
Uh huh. Silicosis. Don't screw around with glass powder.
Last edited by Compro01; 12-03-2013 at 08:33 PM.
-
12-04-2013, 06:33 AM #3
- Join Date
- Oct 2013
- Posts
- 67
-
12-06-2013, 12:11 PM #4
- Join Date
- Sep 2013
- Location
- Saskatchewan, Canada
- Posts
- 294
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion