Results 1 to 10 of 52
Threaded View
-
10-10-2014, 09:57 AM #37
Well... The cool thing about it (to me) is the gear ratio changes as it rotates. You would be hard pressed to find a design where you both need that and need the gears to transition back to the original gear ratio, but it is really neat. If you really did find an application for this and designed it in, my bet is that first tooth gets the living crap beat out of it. That would be because the gear it is driving shifts from a very high gear ratio to a very low gear ration over the span of 1 tooth.
And "Yes!", it really is good for mindless entertainment as you are sitting talking to somebody or what ever. It is fun to just spin the gears...
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help