Results 1 to 3 of 3
Thread: 3D Filament Changing Colors
-
10-07-2014, 01:41 AM #1
- Join Date
- Aug 2014
- Posts
- 5
3D Filament Changing Colors
Quick question for the boards.
I bought some filament on Ebay, Red PLA.
Print temp is set at 200
We just printed out a couple small prints and the red seems to lighten and almost turn orange. Is it my heat temp or... ?
-
10-07-2014, 02:00 AM #2
If you want to argue with your supplier, like mine they will probably say the same thing 'there is no true red"
Filament does change colour at different temperatures, so print (or try) and print it at 160c, if it wont feed go to 170c and so on.. see what happens. I have to say ABS gives me a better or richer red (like Ferrari red) than PLA, PLA is bright tomatoe red.
-
10-07-2014, 09:48 PM #3
P41008-102228.jpg P41008-102551.jpg
yes, i saw mine, the red pla, it is bright red, i also found some dark red pla, the picture shown not clearly, but they obviously different.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion