Results 1 to 10 of 321
Thread: Flashforge 3D Creator forum.
Hybrid View
-
10-07-2014, 08:23 PM #1
Missed this one originally, sorry..
I wondered about that also. When you hit default in makerware, its feeding at 90ms.
Can any of you guys print that fast? and I mean actually in some form of decent quality? I sure can't Since it is makerware, and was designed for makerbots I really did not read too much into that default setting, I just played with them until I literally found the magic setting for each print.
Honestly, the best I can get from my Flashforge is 75ms feed and 120 travel at 0.3mm.
If I try and print at 0.2mm using the same settings, the print is not good.
So far the fastest I can print is on the kossel, which Im up to 110ms feed and 150 travel, and still stable printing aiming for 120ms, but needed a geared stepper to go above 70-80ms
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help