Results 1 to 10 of 42
Threaded View
-
10-05-2014, 03:36 PM #33
- Join Date
- Sep 2014
- Posts
- 6
Using Kapton tape (5 mil) on the corners (and blue tape under the bed), I do not really loose built area.
Have you seen my pictures on this thread?
I think it's safer for extruders than with binder clips.
It's installed in this way for a while and it's solid, clean, the heat transfer is very good and works very well.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help