Results 1 to 5 of 5
Thread: Walter White phone cover
-
11-27-2013, 12:26 AM #1
Walter White phone cover
took under an hour to print
-
11-27-2013, 07:26 AM #2
-
11-28-2013, 07:12 AM #3
Nice! I'd like to get one of these printed with my own face on it. That would be a pretty sweet business to get into. Selling 3D Printed phone cases with your own face on it.
-
11-28-2013, 10:57 AM #4
Geoff, did you generate that design or was it on Thingiverse or another site?
-
11-28-2013, 09:30 PM #5
Nope, just off thingiverse, but its a customiser so you really just need a good photo and you can make your own.
It works on contrast and brightness. It converts your image to greyscale, then you select the contrast level which makes certain parts appear or dissapear. I love breaking bad so just had to make one
Word of warning... obviously need to print these raftless, and if your machine is not calibrated, you will know about it as the face will not look all that great. If you want really really precise detail on these lower your print speed to like 25ms, they only have a few layers and there is no infill so take it nice and slow.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion