Quote Originally Posted by curious aardvark View Post
Very Nice indeed :-)
what infill level did you use ?

So did you use supports for that or not ?
(looks at thingiverse file)

No supports.

Might give that a go but at 0.3 mm and probably reduced size as well :-)

Have to say there were a few of those skulls at the show yesterday - and yours is easily as good as any of them. And some of them were made on machines costing £50,000 plus !

Right going for about a 70% scale t-rex skull at 0.2 in abs.
Added all four pieces to the bed and scaled till they just fit.

No more bulldog clips so i can happily use the whole bed.

I'll run it overnight from the sd-card.

Thanks

20% infill, no supports. Did get some warping at the pointy-and-large-overhanging parts .. like the teeth. If I fix that then it will definitely be a 50.000 pound machine!
Do want to fix that sometime.. maybe I need to reduce the temp even more (currently at 185 for PLA) or increase the fan duct (working on an improved fan duct that utilizes a 60[mm] fan - because my current fan makes TOO MUCH NOISE!)

Just wait till you see the painted model on Friday (currently drying before I add the clear coat, then I'll let it dry for a full day tomorrow.)