Results 1 to 2 of 2
Threaded View
-
09-30-2014, 06:58 AM #2
- Join Date
- Jul 2014
- Location
- Eastern Colorado
- Posts
- 536
There seem to be a few parts missing. How are the hotends attached to that extruder? Also, I'd find some way to rotate it so that the hotends are aligned along the Y axis. There's a bit more room in the Y axis for two nozzles than there is in the X.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help