Results 1 to 9 of 9
Thread: Ultra Newbie Question
Threaded View
-
09-29-2014, 02:03 PM #2
- Join Date
- Apr 2014
- Posts
- 37
Well, in my case I only use a thin layer of elmer's purple glue stick and it doesn't stick too much .
The best thing is to wait for it to completely cool down and it usually pops right out.
Now with that said, a very sharp razor blade scraper does the trick as well.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help