Results 1 to 10 of 54
Threaded View
-
09-20-2014, 10:19 PM #7
- Join Date
- Sep 2014
- Posts
- 1
"The slicing engine is fast and offers high, medium, and low-resolution settings that translate to 0.1mm, 0.2mm and 0.3mm layer heights and pre-assigned infill levels."
No Abs and no infill settings and other advanced settings, not for me..
PrinterBob
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion