Results 1 to 10 of 12
Thread: Creator X died...
Threaded View
-
09-20-2014, 01:07 AM #6
- Join Date
- Jun 2014
- Location
- Burnley, UK
- Posts
- 1,662
If you have 24 volts output from the PSU and the steppers will flash the backlight on the LCD then one suspects it to be the power supply on the main board.
This should not be a hard fix. Where in the world are you?
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion