Results 1 to 10 of 10
Threaded View
-
11-25-2013, 04:51 PM #5
I had a similar prob. Mine was was fairly easy:
One: Remove T5 belts and added T2 with machined pulleys (had printed). Solved
Also, tightened the belts.
Fixing the belt slack (or adding if too tight) could help.
Maybe your motors/pololu's are over heating?
Pots up too high? No fan on the board?
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion