Results 1 to 10 of 34
Threaded View
-
09-07-2014, 11:47 AM #2
looks a bit too 'homemade' for my liking.
Plus says 150mm print height in the ad but 80mm in the detailed blurb. (ah - version 2 is 150mm)
And it's a company I've never heard of - so most likely made in a small workshop somewhere.
And for another £10 you can get one of these
In the pm1 favour:
glass printbed - so should be very flat.
Being sold by an english company. And by the looks of it made by them as well. http://www.3dprintingtech.co.uk/
They mill their own heatblocks so probably make the whole machine. Yep - they pretty much make all the parts as well.
So you 'should' get good support and warranty.
Damn good price for a ready built metal framed glass bed printer.
Not in it's favour:
No control panel or sd card functionality.
Just the one extruder
I have to say, dual extruders are probably not going to get much use - but I would NEVER now have a 3d printer without it's own control panel and sd card reader.
If they had a model with lcd and sd card functionality - I'd definitely say get the PM1.
Tough call - but for me the ctc/flashforge/wanhao wins.Last edited by curious aardvark; 09-07-2014 at 11:54 AM.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion