MakerFarm 10" i3v build

[RaySuave]

The build deck information is wrong in my firmware I guess. I tried to print out my spool holder which is a length of 6.75" and it could not print it with the X and Y bed values set at 250x250mm in Slic3r. It would only print to the 200x200mm borders. After resetting to a 200x200mm bed in Slic3r it re-centered the print and it printed fine. I haven't addressed this yet, but it is next on my project list. I don't know for sure, but I think this is probably a firmware issue. Maybe this just didn't get updated from a i3V 8" firmware before sending out and is a unique issue, I would be interested to hear if anyone else has run across this.

I had this same issue, couldnt get the printer to use the full 250mm X 250mm bed. Emailed Colin about it and he said I most likely have the 8" i3v firmware and he gave me a link to download the 10" firmware to update the printer. After doing this, problem solved. This is the link he gave me https://docs.google.com/file/d/0B80A...p=docslist_api and the tutorial on how to do it https://www.youtube.com/watch?v=sOoj...ature=youtu.be

Not sure why the 10" i3v download isnt available on his site.